Showing 1–16 of 69 results
IR21531STRPBF Mosfet controller SOIC-8
3,50€ Taxes not included
The IR21531D(S) are an improved version of the popular IR2155 and IR2151 gate driver ICs, and incorporates a high voltage half-bridge gate driver with a front end oscillator similar to the industry standard CMOS 555 timer. The IR21531 provides more functionality and is easier to use than previous ICs. A
TLC3702ID Voltage comparator two channel SOIC-8
3,00€ Taxes not included
The TLC3702 consists of two independent micropower voltage comparators designed to operate from a single supply and be compatible with modern HCMOS logic systems. They are functionally similar to the LM339 but use onetwentieth of the power for similar response times. The push-pull CMOS output stage drives capacitive loads directly
BZX85-C18 Zener diode 18V 1W DO-41
0,50€ Taxes not included
Silicon Planar Power Zener Diodes For use in stabilizing and clipping circuits with high power rating The Zener voltages are graded according to the international E 24 standard. Replace suffix “C” with “B” for ±2% tolerance. Other voltage tolerances and other Zener voltages are available upon request
BZX85-C16 Zener diode 16V 1W DO-41
0,50€ Taxes not included
Silicon Planar Power Zener Diodes For use in stabilizing and clipping circuits with high power rating The Zener voltages are graded according to the international E 24 standard. Replace suffix “C” with “B” for ±2% tolerance. Other voltage tolerances and other Zener voltages are available upon request
BZX84-C2V7 Zener diode 2.7V 250mW SOT-23
0,90€ Taxes not included
Low-power voltage regulator diodes in a small SOT23 (TO-236AB) Surface-Mounted Device (SMD) plastic package. The diodes are available in the normalized E24 1 % (BZX84-A), 2 % (BZX84-B) and approximately 5 % (BZX84-C) tolerance range. The series includes 37 breakdown voltages with nominal working voltages from 2.4 V to 75
BZX84-C7V5 215 Zener diode 7.5V 250mW SOT-23
0,90€ Taxes not included
Low-power voltage regulator diodes in a small SOT23 (TO-236AB) Surface-Mounted Device (SMD) plastic package. The diodes are available in the normalized E24 1 % (BZX84-A), 2 % (BZX84-B) and approximately 5 % (BZX84-C) tolerance range. The series includes 37 breakdown voltages with nominal working voltages from 2.4 V to 75
BZT03C240-TR Zener diode 240V 600W SOD-57
2,20€ Taxes not included
Glass passivated junction Hermetically sealed package Clamping time in picoseconds Medium power voltage regulators and medium power transient suppression circuits
BYV26E Fast recovery rectifier diode 1kV 1A
1,50€ Taxes not included
Glass passivated junction Hermetically sealed package Very low switching losses Low reverse current High reverse voltage Switched mode power supplies High-frequency inverter circuits
AT28C64B-15PU EEPROM 64kBit 8k x 8bit 5MHz DIP-28
6,32€ Taxes not included
The AT28C64B is a high-performance electrically-erasable and programmable readonly memory (EEPROM). Its 64K of memory is organized as 8,192 words by 8 bits. Manufactured with Atmel’s advanced nonvolatile CMOS technology, the device offers access times to 150 ns with power dissipation of just 220 mW. When the device is deselected,
OP07CP Operational amplifier 600kHz DIP-8
1,46€ Taxes not included
These devices offer low offset and long-term stability by means of a low-noise, chopperless, bipolar-input-transistor amplifier circuit. For most applications, external components are not required for offset nulling and frequency compensation. The true differential input, with a wide input-voltage range and outstanding common-mode rejection, provides maximum flexibility and performance in
LM321SN3T1G Operational amplifier 750kHz 3V…32V TSOP-5
1,98€ Taxes not included
LM321 is a general purpose, single channel op amp with internal compensation and a true differential input stage. This op amp features a wide supply voltage ranging from 3 V to 32 V for single supplies and ±1.5 to ±16 V for split supplies, suiting a variety of applications. LM321
ADuM3100ARZ Digital isolator 25Mbps SOIC-8
6,32€ Taxes not included
The ADuM31001 is a digital isolator based on the Analog Devices, Inc., iCoupler® technology. Combining high speed CMOS and monolithic transformer technology, this isolation component provides outstanding performance characteristics superior to alternatives, such as optocoupler devices.
74HCT541PW Octal Buffers and Line Drivers With 3-State Outputs TSSOP-20
1,42€ Taxes not included
These octal buffers and line drivers are designed to have the performance of the popular ’HC240 series devices and to offer a pinout with inputs and outputs on opposite sides of the package. This arrangement greatly facilitates printed circuit board layout.
74HCT245D Octal bus transceiver SOIC-14
1,44€ Taxes not included
The 74HCT245D is high speed CMOS OCTAL BUS TRANSCEIVER fabricated with silicon gate C2MOS technology. It achieves the high speed operation similar to equivalent LSTTL while maintaining the CMOS low power dissipation. Its inputs are compatible with TTL, NMOS, and CMOS output voltage levels. It is intended for two-way asynchronous
74HC132D NAND logic gate 2 inputs 5.2mA SOIC-14
2,90€ Taxes not included
The 74HC132D is a high speed CMOS 2-INPUT NAND SCHMITT TRIGGER GATE fabricated with silicon gate C2MOS technology. It achieves the high speed operation similar to equivalent LSTTL while maintaining the CMOS low power dissipation. Pin configuration and function are the same as the 74HC00D but the inputs have 25%
6ED003L06F2XUMA1 IGBT Gate controller DSO-28
6,54€ Taxes not included
Infineon thin-film-SOI-technology Maximum blocking voltage +600 V Output source/sink current +0.165 A/-0.375 A Insensitivity of the bridge output to negative transient voltages up to -50 V given by SOItechnology Separate control circuits for all six drivers Detection of over current and under voltage supply Externally programmable delay for fault clear